Design Features

1. Adjustable louvre window system designed to complement the Vantage 102mm windows and doors. The jambs, head and sill will clip to all 102mm Vantage products.

2. The Vantage LouvreMASTER™ window has been designed to accept the Altair™ adjustable glass louvre system from Breezway Australia. Louvre gallery channels snap to jambs and mullions.

3. 131mm Overall frame is wide enough to allow the flyscreen to be fitted within the frame line, without the need for screws, rivets or unsightly turnbuckles - clean flat finish.

4. The LouvreMASTER™ system has been successfully tested to 450Pa water resistance.

5. The LouvreMASTER™ weather trims snap to head and sill and are cut between galleries - no end notching on trim or
gallery channels.

6. Full height blades always give the best appearance and are the most economical.

7. On non-standard heights the fixed blade is at the sill. This ensures that the majority of blades align through. There is no dead area with the Altair™ system.

8. The 102mm and 152mm blade can be glass, aluminium or timber.

9. Two mullion strengths cover most situations. Including Darwin up to 3000Pa design wind load.

10. Fixed inlay adaptors make it possible to have adjustable louvres and fixed lights within the same frame.

11. Head and sill run through. This makes it easy to fit louvres over doors using one of our highlight couplers (42030 or 42027).

12. 3° Fall in sill guides water, dust and salt out of the window system.

13. This window is available with a built-in security bar.

The Vantage LouvreMASTER™ window has been designed and tested with the Altair™ gallery system supplied by Breezway Australia. Australian Registered Design