Design Features

1. High water resistance of 300Pa allows these doors to be installed into most residential projects.

2. Can be fabricated as 'XXF', 'FXX', 'FXXXXF', 'XF', 'FX', 'FXF', 'XFF', 'FFX' and 'FXXF'.

3. The accompanying optional stacking multi panel external flydoor system is snapped to the main frame. This applied flydoor
system may not be required on high rise apartments.

4. The 108.60mm wide perimeter frame will couple to a large variety of Vantage adaptors :
• 180° Door to window vertical coupler.
• 135° Door to window bay coupler.
• 90° Door to window bay coupler.
• Door highlight couplers.

5. Flat external fillers creates a clean closed off frame appearance. On the sill the infills guide water away from the door panels and improve water resistance.

6. Unused internal and external frame recesses are closed with snap-in flat fillers for improved appearance.

7. Door panels can be glazed with thick or insulating glass. We have dedicated stiles for glass up to 16mm thick and an inlay adaptor to accept 19mm Insulating glass units.

8. We offer a large variety of locks including multi-point mortice, go to our web site to see the locks available.

9. Heavy door panels can be fitted with double bogey wheels for smooth long term operation. Running rails can be replaced in the future if necessary.

10. Can be fitted into commercial type sub-sill for very high water resistance.

11. Flydoors are fitted with snap-on interlocks again for improved appearance and labour saving.

12. WERS (Window Energy Rated System) tables are in section 04. Sound reduction ratings can be found in section 55.

13. For higher performance or very large size doors check out 'SlideMASTER' Series 702, section 78.