Design Features

1. Successfully tested for compliance with Australian Standard AS 2047.

2. Optional meeting stile strengths cover a large variety of design wind load areas.

3. The meeting stiles have been designed to withstand wind loads, and equally important the lock stile has enough body strength to carry the lock and not flex excessively while opening and closing the door.

4. Two heavy duty sill options - One for standard water performance and a tall sump type sill for very high water performance.

5. Low line nursing home sill option, shown later in these notes.

6. Flydoors slide on the outside and run on large diameter wheels.

7. Glass door external meeting stile has built-in interlock to accept the flydoor interlock.

8. The glass door and flydoor rolling tracks are protected from accidental damage by the splayed threshold.

9. Panels can be re-handed on site (slide direction reversed).

10. Door panels can be glazed with thick or insulating glass units.

11. WERS (Window Energy Rated System) tables are in section 04. Sound reduction ratings can be found in section 55.

11. Full range of door to window couplers allow this door to be joined to any Vantage window, refer section 60.

12. Double weatherpile sealed door panels for maximum air and water exclusion.

13. Sill drain holes are covered with PVC hinge flap to reduce air and insect infiltration.

14. For vary high performance or larger doors refer 'SlideMASTER' Series 702, section 78.