Design Features

1. This high performance sliding door has been tested for compliance with the relevant Australian Standards.

2. Achieved a very high water resistance of >600Pa and complied with the air-conditioning requirements of the standard.

3. The extra strong multi-hollow meeting stiles allow large sliding doors to be fabricated in high wind load areas, refer Pascal rating tables later in these notes.

4. Clean rounded lines for improved visual appearance.

5. There are a large variety of door combinations possible (XF, FX, FXF, XFF, FFX, FXXF, XXF, FXX, FXXXXF, FX^XF or FXX^XXF).

6. The door is compatible with the high performance Series 406 and 606 FrontGLAZE™ framing. The head and jamb sections have an additional weather leg to ensure that junctions between doors and fixed sidelights/highlights maintain the high water resistance.

7. Doors can be fitted with surface mounted deadlock, mortice lock or multi point mortice lock.

8. Doors run on heavy duty double bogey wheel carriages.

9. Variety of bottom rail and midrail sizes as detailed later.

10. Aluminium sub-sills are available and should be used in all installations.

11. Will accept glass up to 10.38mm thick single glazed or 20mm and 25mm double glazed IGU.

12. Thresholds and snap-in flat filler ensure that the clean looks are maintained.

13. Doors can be fitted with sliding flydoors.

14. There is a matching sliding window system, refer section 19.