Design Features
1. The Vantage 549 framing has been designed as a replacement
for the traditional 135mm x 38mm timber entry door framing.
Frames can be delivered to site prepainted and with door panels and hardware
fitted.
2. Series 549 comes with self draining sill option on internal opening doors
(as detailed below). Alternatively for those exposed
locations we recommend the external swing splayed sill. Both internal and
external swing doors fitted with sill section have been
tested to Australian Standard AS2047 and will resist 200Pa water.
3. The aluminium entry door features extra wide top and bottom rails that
give the door the chunky appearance of traditional
timber designs. This strength of appearance is also backed up by true structural
integrity. Vantage Series 549 doors feature a thoughtful but invisible innovation
- specially designed backing plates at the four corner joints of the door
to make sure that the door stays rigid and square. Compare our door with
others available and you will see what we mean about strength and rigidity.
4. Rebated door stiles give a flush appearance when the two doors meet and
provide superior weather protection. Unsightly
applied rebates are eliminated.
5. Throwing the lock tongue into timber framing has always been a security
weakness. Series 549 aluminium frame will significantly improve this locking
point.
6. Doors can be supplied with a lever lock installed in the door stile or
with a tulip knob lock placed in a door chair rail.
7. Custom injection moulded lock keeper on pair of doors, stainless steel
keeper on single doors.
8. Custom hinges wrap around the aluminium door stile. These custom components
dramatically improve the appearance, save time and money. The frame has been
reinforced (thickened) at hinge fixing points.
9. Doors can be fitted with custom parliament hinges for those applications
where doors have to lay open at 180° against the wall.
10. Custom door and glazing co-extruded Santoprene seals for maximum weather
performance and resistance to shrinkage.
11. Magnum awning/casement sashes can be built into Series 549 framing as
shown later in this section.
12. Both doors and sidelights can be double glazed with 19mm insulating glass.
13. Door sill slopes towards the outside to prevent ponding shed water away
from the door seal, the area under the door panel also falls towards the
drainage hole. The sloping/stepped tread again prevents ponding and dust
buildup.
14. Rebated frame will accept 19mm screen doors.
15. Door panels can be fitted with ClearVENT™ sashless double-hung
panels, refer section 27.
16. WERS (Window Energy Rated System) tables are in section 04. Sound reduction
ratings can be found in section 55.


